УРА УСТАНОВИЛ!!
эта команда отправляет на мой север текст 1:% вот что пришло а команду саму на отправку не вижу и почему то данные не приходят от сервера просто подключился и один раз отправил 1:% сервер и все и в консоли ПУСТО! хотя подключился но команда print("Connected with result code "+str(rc))
что то не показывает ничего в консоли странно и ошибок нет
import paho.mqtt.client as mqtt
# The callback for when the client receives a CONNACK response from the server.
def on_connect(client, userdata, flags, rc):
print("Connected with result code "+str(rc))
# Subscribing in on_connect() means that if we lose the connection and
# reconnect then subscriptions will be renewed.
client.subscribe("$SYS/#")
# The callback for when a PUBLISH message is received from the server.
def on_message(client, userdata, msg):
print(msg.topic+" "+str(msg.payload))
client = mqtt.Client()
client.on_connect = on_connect
client.on_message = on_message
client.connect("127.0.0.1", 5792, 60)
# Blocking call that processes network traffic, dispatches callbacks and
# handles reconnecting.
# Other loop*() functions are available that give a threaded interface and a
# manual interface.
client.loop_forever()